Til toppen

SmartOne Zigbee Veggbryter 1-kanals


StartGuide for SmartOne Zigbee Veggbryter 1-kanals [ art.nr. S57001 ]


1. TouchLink he SmartOne remote to a Zigbee device

2. Connect the SmartOne remote to a Zigbee Smart Hub

3. Factory reset



TouchLink the SmartOne remote to a Zigbee device

1. Set the Zigbee device to TouchLink pairing mode (refer to the manual).

2. Bring the remote and the Zigbee device within 10 cm distance.

3. Hold down the ON and OFF button for at least 8 seconds to activate TouchLink pairing.

4. Press the ON button twice to activate TouchLink commissioning. 

 

Troubleshooting: 

1. Repeate step 1-4. 

2. Factory reset the remote and then try step 1-4 again. 



Connect the SmartOne remote to a Hub/Gateway

1. Choose to add a new device from your compatible Zigbee Hub Interface and start searching for new Zigbee devices on the network.

2. Hold down the ON and OFF button for at least 8 seconds to activate TouchLink pairing.

3. Press the ON button once to pair the remote with the hub. 



Factory reset the SmartOne remote

1. Hold down the ON and OFF button for at least 8 seconds to activate TouchLink pairing.

2. Press the main power button of the remote 5 times to reset the remote. 

Note: This will reset the remote and erase all settings done to the remote. 


SmartOne Zigbee Veggbryter 1-kanals

Trådløs veggbryter med 2 knapper. Kan monteres utenpåliggende på vegg. Basert på den nyeste Zigbee 3.0-protokollen som støtter Touchlink-kommunikasjon med Zigbee-enheter. Kan også brukes som modusbryter sammen med hub. Batteridrevet. Passer i 55x55 mm ramme.
S57001