SmartOne Zigbee Fjernkontroll 3 soner 4 scener
StartGuide for SmartOne Zigbee Fjernkontroll 3 soner 4 scener [ art.nr. S57007 ]
1. Set the Zigbee device to TouchLink pairing mode (refer to manual).
2. Bring the remote and the Zigbee device within 10 cm distance.
3. Hold down the ON and OFF button for the zone you want to pair for at least 8 seconds to activate TouchLink pairing.
The LED indicator will puls fast to indicate a successful connection with the device.
1. Repeate step 1-3.
2. Factory reset the remote and then try step 1-3 again.
1. Choose to add a new device from your compatible Zigbee Hub Interface and start searching for new Zigbee devices on the network.
2. Hold the main power button of the remote until the green LED indicator lights up solid green.
3. Press the main OFF button on the remote to start pairing mode.
1. Adjust the brightness of all connected lights to your desicierd settings.
2. Hold the S1, S2, S3 or S4 button to save your settings.
Note: To replace a scene, just repeat step 1-2 again.
1. Hold the main power button of the remote until the green LED indicator lights up solid green.
2. Press the main power button of the remote 5 times to reset the remote.
Note: This will reset the remote and erase all settings done to the remote.